Most of the time spent on a small job is spent guessing. Try the 13, put it back, try the 14. This one skips that part. Push it onto the fastener and the 54 rods fold back around whatever is there, metric or imperial, six sides or four. You go straight to turning it.
Universal Grip Socket
$49.00
$89.99
✅ One socket replaces a whole tray of sizes
✅ 54 spring-loaded steel rods grip 7-19mm and 1/4 to 3/4 inch
✅ Takes wing nuts, hooks, eye bolts and rounded-off heads
✅ Hex adapter included, so it runs on any drill or driver
✅ Chrome vanadium steel, arrives in a printed gift box
Want it by Friday, 23. Oct?
What you get
One universal grip socket and one hex drill adapter. The socket covers 7 mm to 19 mm metric and 1/4 inch to 3/4 inch imperial, so it works on both systems without you owning both sets. The adapter drops the socket onto any drill or impact driver that takes a standard hex shank. It arrives in a printed box, which is worth knowing if it is going to someone.
Materials
Chrome vanadium steel body, the same alloy a decent socket set is made from, so it holds its shape under hand-tool loads. Inside sit 54 hardened steel rods, each on its own spring, which is what lets the face close around a shape instead of matching one size. The drill adapter is machined steel with a hex shank.
Care
Grit between the rods is the one thing that stops it working properly. Blow or brush the face out after a dirty job and work the rods in and out a few times to clear them. A light spray of tool oil keeps the springs moving and the rust off. Store it face down in the drawer rather than loose in a toolbox.
Will it fit what you are working on?
Four figures that answer it before you buy.
54rods
Spring-loaded steel pins that close around the head instead of matching one size
7-19mm
Metric range, which covers most fasteners around a house, a car or a mower
1/4-3/4in
Imperial range on the same socket, so you are not buying two sets
2pieces
The socket and a hex drill adapter, both in the box
One socket instead of the whole tray
Same bolt, two ways to get at it
The fastener has not changed. What you reach for has.
WithoutSizing it up, one socket at a time
The tray comes out, you work through three or four sizes, and half of them end up loose on the floor. On an odd head, a wing nut or a hook, none of them fit at all.
With the socketStraight onto the head, first go
Push it on and the rods take the shape of whatever is under them. One tool out of the drawer, one tool back in.
How the grip works
Four things worth knowing before it lands in your toolbox.
Fifty-Four Steel Rods
Each rod sits on its own spring, so the face takes the shape of the fastener rather than asking the fastener to match a size.
Chrome Vanadium Body
The same alloy a decent socket set is made from. It holds the rods square under load instead of spreading the way soft steel does.
Hex Drill Adapter
A machined hex shank that drops the socket onto any drill or driver, for the jobs with a lot of fasteners and not much torque.
Self-Resetting Face
Pull it off and the springs push every rod flat again, so it is ready for the next fastener without you touching it.
Where one socket beats a full set
Small jobs, mixed fasteners, and heads that were never a clean hex to begin with.
Car and bike jobs
Battery terminals, plate bolts, seat rails and mirror stems, without a tray on the driveway.
Flat-pack and furniture
Bed frames and wardrobes where the bolts are all slightly different and the key bends.
Mowers and garden gear
Deck bolts, wheel nuts and handle fixings on equipment that lives outside.
Shapes a socket will not take
Wing nuts, eye bolts, hooks, square heads and the ones a previous owner chewed up.
Why not just buy a full socket set?
Fair question, and the last row is the honest answer.
A full socket set
- Try one, put it back, try the next
- Hex and square only, nothing else fits
- A rounded head defeats it
- A tray of sockets and two systems
- This is where the full set wins
Universal Grip Socket
- It closes onto whatever is there
- Wing nuts, hooks, eye bolts, square heads
- Rods grip whatever flats are left
- One socket and an adapter
- Hand tools and light drill work only
Put it in a drill and stop winding
The hex adapter in the box drops the socket onto any drill or driver you already own. On a deck, a trailer floor or a flat-pack wardrobe, that turns an afternoon of wrist work into a few minutes. Run them down under power, then nip the last quarter turn up by hand.
Three moves, start to finish
No sorting through a tray to find the one that fits.
1
First
Push it onto the head
Straight on, no sizing up. The rods fold back around the shape and the ones on the flats stay put.
2
Then
Turn it with what you own
A ratchet on the square drive, or the hex adapter into a drill when there are a lot of fasteners to get through.
3
Finally
Pull it off and it resets
The springs push every rod flat again, so it is ready for the next one without you doing anything.
New arrivals
-
SALE ENDS AT MIDNIGHTUniversal Wrench Extender Bar
Regular price $89.00Regular priceUnit price per$139.00Sale price $89.00SALE ENDS AT MIDNIGHT -
SALE ENDS AT MIDNIGHTRatchet Fence Tightener
Regular price $119.00Regular priceUnit price per$187.00Sale price $119.00SALE ENDS AT MIDNIGHT -
SALE ENDS AT MIDNIGHTHog Ring Pliers Kit
Regular price $89.00Regular priceUnit price per$179.00Sale price $89.00SALE ENDS AT MIDNIGHT -
SALE ENDS AT MIDNIGHTFlexible Socket Extender for Tight Spaces
Regular price $119.00Regular priceUnit price per$215.00Sale price $119.00SALE ENDS AT MIDNIGHT
Why Tradespeople Choose Galixo
Built to lastForged and hardened steel, not pot metal
Saves a tripDoes the job without a second pair of hands
Fits what you ownStandard sizes, no proprietary adapters
Tracked deliveryA tracking number on every order
90-day returnsWrong tool for the job? Send it back
Two pieces: the universal grip socket and a hex drill adapter. Both are in every order, there is nothing to choose between.
7 mm to 19 mm metric and 1/4 inch to 3/4 inch imperial, on the same socket. Because the rods take the shape rather than the size, it also grips wing nuts, eye bolts, hooks, square heads and hex heads that have started to round off.
Yes, and it is worth knowing before you order. It is a hand-tool socket, so keep it off impact wrenches and away from high-torque fasteners like wheel lug nuts and crank bolts, where a proper six-point socket is the right answer. It also needs room around the head to seat, so deeply recessed nuts and tight-clearance spots are jobs for a normal socket.
Yes, that is what the hex adapter is for. Use it to run fasteners down quickly on a drill or driver, then finish the last turn by hand so you can feel the tension. Do not put it on an impact wrench.
It ships in a printed box rather than a poly bag, so it does not need wrapping to look like a present. We do not put prices or invoices in the parcel.
We ship from two warehouses, one in California and one overseas, and the system picks whichever holds stock. To the US that is 5 to 15 business days in total from a California dispatch, or 12 to 25 business days from overseas. Every order gets a tracking number by email at dispatch. Shipping is free either way.
If your parcel has not arrived within 30 business days of dispatch, email us and we will reship or refund in full, your choice, with nothing to send back. You also have 90 days from delivery to return an item you no longer want. We reply to every message within one business day.