The 250 mm bar gets into a cramped bay without fighting the fan shroud. The 350 mm reaches past the first obstruction to the bolt behind it. Both are in every set, so the reach you need is already in your hand instead of back in the drawer.
Flexible Socket Extender for Tight Spaces
$119.00
$215.00
🛠️ Reach every awkward bolt with ease
💪 Unstoppable torque in tight engine bays
🔒 Zero frustration with secure socket locking
⚡ Finish tough repairs faster than ever
Want it by Monday, 14. Sep?
What you get
Two flexible drive bars, one 250 mm and one 350 mm, so you have a short one for cramped bays and a long one for deep reaches. Each has a 1/2 inch male square drive at one end and a 1/2 inch female square socket at the other, which means it drops straight in between the ratchet and the socket you already own.
Materials
Tightly coiled spring steel shaft that flexes without taking a permanent set, finished in black to keep corrosion off in a damp garage. Machined drive ends with a spring-loaded ball detent so sockets click on and stay on.
Care
Wipe it down after use to clear grease and grit out of the coils. A light spray of tool oil on the drive ends keeps the ball detent clicking cleanly. Store it flat or loosely coiled in the drawer.
Two bars, one set
The numbers that decide whether it reaches your bolt.
2bars
Both lengths come in every set, no choosing and hoping
250mm
Short bar for cramped bays and shallow reaches
350mm
Long bar for deep reaches past the first obstruction
1/2in
Square drive, male one end and female the other
Two lengths, so you stop compromising
Same bolt, two ways to reach it
The fastener has not moved. Only the angle you can come at it from has.
WithoutRatchet will not line up
A straight extension needs a clear run to the bolt. When a hose or bracket is in the way, the socket sits crooked and you end up stripping parts off just to get square.
With the setCurved around it, socket square
The coiled shaft bends past the obstruction and stays pointed at the fastener, so your hand works in the open while the socket does the job down in the gap.
What is in the set
Four things worth knowing before it lands in your toolbox.
Coiled Steel Shaft
Tightly wound spring steel that carries rotation through a curve and springs back instead of taking a permanent bend.
1/2 Inch Drive Ends
Male square drive one end, female square socket the other, so it sits between your ratchet and your socket with nothing else needed.
Ball Detent Retention
A spring-loaded ball in the drive end clicks the socket on and holds it there when you are working blind.
Two Lengths
250 mm and 350 mm in every set, because the reach you need changes with the job.
Where a straight extension gives up
Anywhere you can see the bolt but cannot get square to it.
Crowded engine bays
Reach starter and alternator bolts without pulling the intake to get square to them.
Under the dash
Work bolts you can touch but never line a ratchet up with.
Exhaust and manifold
Come at seized fasteners from an angle instead of dropping the whole assembly.
Machinery and equipment
Guarded pulleys and boxed frames where a straight extension will not fit.
Why not just use a universal joint?
That is the usual answer, so here is the honest comparison.
Extension and U-joint
- Ratchet, extension, U-joint, socket
- Hinges at one point, so the socket wanders off the bolt
- Joint flops and binds until you get it started
- Needs a straight run to the fastener
- Stack extensions until it is roughly right
Flexible Socket Extender set
- Ratchet, bar, socket
- Curves along its length and stays pointed at the bolt
- Coil holds its shape while you turn
- Bends around hoses, brackets and looms
- Two lengths in the set, pick the one that fits
A coil that keeps turning
A universal joint hinges at one point, so the socket wanders off the bolt the moment you load it. This shaft curves along its whole length and stays pointed where you set it. The ball detent in the drive end holds the socket on while you are working blind.
Three moves, start to finish
No stripping the assembly down just to get square to one fastener.
1
First
Pick the length that reaches
250 mm for tight bays, 350 mm when the fastener sits deeper.
2
Then
Ratchet on one end, socket on the other
Male square drive takes your ratchet, female square socket takes the socket you were already going to use.
3
Finally
Bend it and turn from where you have room
Your hand stays out in the open while the socket does the work down in the gap.
New arrivals
-
SALE ENDS AT MIDNIGHTRatchet Fence Tightener
Regular price $119.00Regular priceUnit price per$187.00Sale price $119.00SALE ENDS AT MIDNIGHT -
SALE ENDS AT MIDNIGHTUniversal Wrench Extender Bar
Regular price $89.00Regular priceUnit price per$139.00Sale price $89.00SALE ENDS AT MIDNIGHT -
SALE ENDS AT MIDNIGHTHog Ring Pliers Kit
Regular price $89.00Regular priceUnit price per$98.00Sale price $89.00SALE ENDS AT MIDNIGHT -
SALE ENDS AT MIDNIGHTFlexible Socket Extender for Tight Spaces
Regular price $119.00Regular priceUnit price per$215.00Sale price $119.00SALE ENDS AT MIDNIGHT
Why Tradespeople Choose Galixo
Built to lastForged and hardened steel, not pot metal
Saves a tripDoes the job without a second pair of hands
Fits what you ownStandard sizes, no proprietary adapters
Tracked deliveryA tracking number on every order
90-day returnsWrong tool for the job? Send it back
Two bars, one 250 mm and one 350 mm. You get both in every order, you do not pick one.
Each bar has a 1/2 inch (12.7 mm) male square drive at one end and a 1/2 inch female square socket at the other, so it sits between a standard 1/2 inch ratchet and a standard 1/2 inch socket.
The coiled shaft curves along its whole length rather than hinging at one joint, so it follows the path you set it on and keeps turning through the curve.
It is designed for hand tools, ratchets and breaker bars. Sustained impact loads fatigue a coiled shaft over time, so if you are planning to run it on an impact wrench, message us first and we will tell you where the limits sit.
We ship from two warehouses, one in California and one overseas, and the system picks whichever holds stock. To the US that is 5 to 15 business days in total from a California dispatch, or 12 to 25 business days from overseas. Every order gets a tracking number by email at dispatch. Shipping is free either way.
If your parcel has not arrived within 30 business days of dispatch, email us and we will reship or refund in full, your choice, with nothing to send back. You also have 90 days from delivery to return an item you no longer want. We reply to every message within one business day.